E1 G703 - V35 Interface Converter/Protocol Converter
This is used widely in connecting WAN and LAN, video monitor. data interface is DCE, connnect with DTE or DCE. The main E1 link may be clocked from the recovered receive clock (LBT), from the data port, or from an internal oscillator. The G.703 port provides for either 75 Ohm unbalanced connection via BNC connectors or 120 Ohm balanced connection via RJ-45/48. The AN-E1-V35/V24 DIP and slide switches, located on the front panel, provide for easy setup and control of all functions. Features: Converts V.35 interface into G.703 E1 interface 2.048Mbps data transparent transmission Provides three clocking modes for maximum flexibility Supports E1 balanced and unbalanced interfaces Power supply AC220V& DC-48V Technical Specification E1 Port Standard 2M Port: ITU-T G.703 and G.704 compliant Code Type: HDB3 Code Rate: 2.048Mb/s±50ppm E1 Interface: Unbalanced: 75Ω/BNC or Balanced: 120Ω/RJ45 V.35 Port Standard Code Rate: 2.048Mb/s Clock :Master/Slave/Source three optional clocking modes Interface Type: V.35 / DCE Electrical Characters: ITU-T V.35 proposed standard balance Terminal standard: ISO2593 compliant Environment Power Input AC+DC Power Consumption: ≤5W Operating Temperature: -5°C~50°C Storage Temperature: -40°C~+70°C Relative Humidity: 10%~90% Non-condensing No corrosive and solvent gas, no fluty dust and intense magnetic-field interference Physical: Dimension: 200mm(width) x

gucci bags
gucci sosa mixtape tracklist Metrowny gucci bags http://www.gucci-handbags-clearance.com